Thimblenest Thursdays: Summer/Winter Stitchalong--The Finished Banner

Do you have all of your letters stitched? If not, no worries, autumn doesn't officially begin until September 23, so you have plenty of time! Fall is my favorite season, so I am eagerly awaiting its arrival, although I am actually sorry to see summer go this year!

PATTERN/EMBROIDERY DESIGNS

One more time, here is the pdf with all of the letter/motif designs, as well as enlarged versions of most of the motifs.

MATERIALS

Let's put the bunting/banner together. If you weren't here for Week 1 of the stitchalong, gather the following materials:

• 6* (or more)  9" x 7" (23 cm x 18 cm) fabric rectangles for backing**
• 6* (or more) 8.5" x 6.5" (21.5 cm x 16.5 cm) rectangles of lightweight iron-on interfacing**
• 1 package/3 yards extra wide double-fold bias tape (or make your own)
• scissors
• pins/sewing clips
• sewing machine

*Cut more than 6 if you want to add extra autumn motifs or blank "flags" to your bunting (in addition to the letters).

ATTACH INTERFACING

Affix lightweight interfacing to the wrong side of each quilting cotton rectangle. These will become the backing for your embroidered pieces. Center the interfacing so that there is approximately 1/4" between it and all edges of the fabric.

SEW FRONTS AND FACINGS TOGETHER

With right sides together, sew an interfaced quilting cotton rectangle to the back of each embroidered rectangle using a 1/4" seam allowance. Sew only the sides and bottom. The top edges are left open to turn the embroidery right side out; the raw edges will be enclosed later. To make turning the fabric easier, take the corner stitches at a 45 degree angle, rather than making them square.

TRIM EDGES & CORNERS; TURN TO OUTSIDE; TOPSTITCH

Trim the corners close to stitching. You could trim along the other stitching as well; I opted not to because I felt like the seam allowance was already small enough and I didn't want to compromise the strength of the seam/fabric.

Flip each stitched rectangle right side out. Take your time here--use a turning tool (I use a chopstick) and a hot iron to make sure the edges are straight and the corners as sharp as possible. If needed, roll the edges of the rectangle a little toward the back to keep the quilting cotton from showing from the front.

Once you are happy with the turned edges, topstitch (1/4" from edge) around the sides and bottom to hold everything in place.

Trim any loose threads from the top of each rectangle.

PREPARE BIAS TAPE

Remove bias tape from the package and iron out creases. Find the center of the tape by matching the short edges together; mark with a pin at the center fold.

CENTER & SPACE RECTANGLES; PIN/CLIP

I had an even number of rectangles to sew onto my bunting, thus, the T and the second U needed to be on either side of the center of the bias tape. 

To achieve a 2" space between each rectangle/flag, start by placing the right edge of the T and the left edge of the second U 1" away from the center of the bias tape. 

Sandwich the top of each rectangle inside the bias tape and pin or clip securely in place. Be sure that the shorter edge of the bias tape is on top (on the front of each rectangle) and the longer side is towards the back.

Keeping a space of two inches between the rectangles/flags, continue to work from the center towards the outside edges, sandwiching each new rectangle inside the bias tape and pinning or clipping securely in place.

STITCH

Slowly and carefully, begin stitching at the far left end of the bias tape; with the short side up, stitch through to the back, closing the bias tape as you go. Stitch a continuous seam from the left side of the banner to the right. Each time you reach a rectangle/flag, backstitch a time or two at each edge for added stability. Be sure that the raw edges of each rectangle are fully enclosed within the bias tape.

Your banner/bunting is finished! As you can see, I flipped my two end rectangles around so that the quilting cotton showed on the front side at each end. I'd waited to long to use that Flea Market Fancy to hide all of it in the back!

Thanks for following along this summer as I brought you this stitchalong; I had fun preparing each letter and I'm super excited to hang up my new autumn banner!

As always, we'd love to see this or any other project inspired by a Feeling Stitchy post on Instagram (@feelingstitchyish) or in the Flickr Group!

Thimblenest Thursdays: Summer/Winter Stitchalong, Week 5

And here we are at Week 5 of the Summer/Winter Stitchalong and the letter M! I don't think that mushrooms are necessarily an autumn thing, but I thought they would look cute on the finished banner, so there you go!

Grab this week's pattern for the letter M and let's get started!

I took a quick look back at all of the letters so far, trying to balance the colors and stitch styles so that everything will be cohesive in the final banner. 

Some of my thread skeins are starting to dwindle down, but there are plenty of colors left. Here's what I did:

The M was outlined in chain stitch using DMC 721. The inside of the letter was stitched using the herringbone stitch in DMC 3852. This was the first time I'd tried herringbone, and this video from Nancy Corbett was especially helpful.

The mushrooms were all embroidered in stem stitch using different combinations of DMC 721, 3852, 327, and 350. These little fungi could be stitched in many different ways using a variety of fill stitches. 

I'll be back with the final letter in A-U-T-U-M-N in two weeks. And remember, we're always glad to see your embroidery work on Instagram #feelingstitchy or in the Flickr Group!

Thimblenest Thursdays: Summer/Winter Stitchalong, Week 3

Here we are, halfway through the Summer/Winter Stitchalong, though thankfully not halfway through summer itself! The next two weeks are all about stitching the letter "T", and is this ever a fun one!


First grab your AUTUMN "T" embroidery pattern, and then let's take closer look at the colors and stitches I used.

For the letter "T":

Outline: 3 strands, DMC 154, chain stitch

Inside of the T: 3 strands, DMC 154 and 720. I used "laid stitch with cross-stitch couching", which was really fun. It went quickly, but I think it gives a nice, clean look when finished. I followed these directions (scroll down the page).

Thistles: 3 strands, DMC 327, 728, & 3852, stem stitch.

As always please share this or any other Feeling Stitchy-inspired embroidery projects in the Flickr Group or on Instagram with #feelingstitchy!

Thimblenest Thursdays: Summer/Winter Stitchalong, Week 2

It's time for the second letter in our AUTUMN banner for our Summer/Winter Stitchalong. If you want to know more about the project, you can find the details in the kick-off post here.

MATERIALS

Linen rectangle

Letter "U" Stitchalong Design

Embroidery Floss: DMC #350, 352, 720, and 779

PROCEDURE

Once again, this project is meant to be one means of having fun with your stitches and trying new techniques--we're not looking for perfection. I'm focusing on different ways of using the running stitch and cross stitch, but you can do whatever you like!

For this week's letter "U", I again outlined the letter with chain stitch, using 3 strands of DMC 779. For the interior running stitch I used 3 strands of DMC 350, and then wove 3 strands of DMC 352 through the running stitch back and forth from left to right in what I like to think of as a slalom pattern.

For the Mountain Ash berries (common during the fall in the Pacific Northwest) I outlined with 2 strands of DMC 720 using stem stitch. These are especially finicky and in retrospect, I think backstitch would have worked better here.

The stems were stitched with stem stitch (imagine that!), using 1 strand of DMC 779. I altered the berry bottoms from what you will see on the pattern--the 5-star type design on the bottom of the berries was too difficult to stitch nicely, so I changed mine to a simple cross stitch of 1 strand of DMC 779.

How are your Autumn banner designs coming along? We would love to see them, so please share in the Feeling Stitchy Flickr group or on Instagram with #feelingstitchy. There's still plenty of time to join in!

Our stitchalong will return in two weeks with the letter T! Happy Stitching!

Thimblenest Thursdays: Summer/Winter Stitchalong, Week 1

Welcome to Week 1 of the Feeling Stitchy Summer~Winter Stitchalong! Whether you're traveling cross country on a road trip or sitting by the pool in the Northern Hemisphere or cozying up with a cup of tea and your favorite sweater in the Southern Hemisphere, it's the perfect season for an embroidery project!

Every two weeks over the next three months I'll be posting a new design for the project with stitch tips/suggestions and hopefully some photos featuring your stitching from previous weeks! (Be sure to share your work in the Feeling Stitchy Flickr group and on Instagram with #feelingstitchy!)

When the Stitchalong is finished, you'll have everything you need ready to stitch together an "AUTUMN" banner/bunting, just as the seasons change once again (sorry, Southern Hemisphere, this is the only part I couldn't get to work out for you, too!).

Since this is Week 1, we have a lot to go over. First, let's gather our materials . . .

MATERIALS

• 6* (or more)  9" x 7" (23 cm x 18 cm) fabric rectangles for embroidering (I'm using linen, but choose whatever you like best!)
• embroidery floss (suggested color palette below)
• AUTUMN embroidery design (get week 1 here)
• embroidery transfer pen, etc.
• embroidery hoop
• pinking shears
• sewing machine
• 6* (or more)  9" x 7" (23 cm x 18 cm) fabric rectangles for backing**
• 6* (or more) 8.5" x 6.5" (21.5 cm x 16.5 cm) rectangles of lightweight iron-on interfacing**
• 1 package/3 yards extra wide double-fold bias tape (or make your own)

*Cut more than 6 if you think you would like to add autumn motifs (provided) to your bunting (in addition to the letters).

**When finished, your embroidered pieces can either be left as-is, or you can back them with a light interfacing and coordinating quilting cotton.

SUGGESTED COLOR PALETTE

The colors above are the ones I'll be pulling from as I stitch each letter; there's no guarantee that I'll actually use all of them by the end of the Stitchalong, but I just couldn't bear to leave any behind. DMC floss from left to right: 779, 327, 154, 350, 352, 721, 720, 728, and 3852.

Prep Fabric

If you plan on backing your embroidered fabric, serge, pink, or zigzag the edges of the linen so it doesn't fray while you're embroidering.

If you don't plan on backing your finished letters, just use pinking shears when you're cutting the rectangles out.

This Week's Letter: A

Click here for the Week 1 embroidery design.

I'm hoping each week's letter design will be accessible for all levels of stitchers, since this is meant to be a laid-back, un-stressful experience. I'm basing most of the stitch ideas off of the running stitch and cross stitch, after finding this gem of a resource. Each week I'll show you what I did, but you can adapt/change/throw my ideas out as you see fit--make this yours!

Here's what I did with the Letter A; for all stitches I used 3 strands of embroidery floss:

• Chain stitch outline (DMC 720)
• Vertical interior running stitch (DMC 154)
• "Zig zag" between running stitches (DMC 728)
• Acorn bottoms (DMC 3852)
• Acorn "caps" (DMC 154)--3 strands was too much here; I should have used only 1 or 2.

Any questions?--I'll check the comments below. Otherwise, I'll be looking for your fabulous stitching in the Flickr Group and on Instagram and we'll meet back here in two weeks for the next letter! Happy Stitching!