The MP line of camouflaged manpack antennas are
designed for forward use. They take little space in
your pack, are very light, and easily assemble into a
fully functional antenna for 1.6 - 30 Mhz. They are
non-grounded, true balanced antennas, and work
without a ground. Use these for NVIS ALE
communications with your PRC-150 (or similar) field
radio at 20 Watts maximum. Camouflaged super
flexible PVC coated copper wire allows many cycles
of redeployment without breakage. Recommended
use is with our matching manpack mast system and carry bag.
The BWDI line of antennas are designed for tactical use.
They are camouflaged, and come with a carry bag. They
are non-grounded, true balanced antennas, and work
without a ground. Use these for NVIS (short), medium and
long range communications. The physical setup (height
and configuration) will determine the type of propagation,
and the distance of communication. Use these for NVIS
ALE communications with any HF radio up to 1000 watts
intermittent (PRC-150 with PA, VRC-100, etc). Camouflaged
super flexible PVC coated copper wire allows many cycles of redeployment
without breakage. Recommended use is with our matching MK114 NVIS or long
range tactical masts.
The BWDS line of antennas are designed for base use. They
are non-grounded, true balanced antennas, and work without a
ground. Use these for NVIS (short), medium and long range
communications. The physical setup (height and
configuration) will determine the type of propagation, and the
distance of communication. Stainless steel, non-camouflaged,
1KW intermittent power rating, designed for a single
deployment. Recommended use is with our matching MK112
heavy duty masts.
The ACS line of antennas are grounded, and
require a good ground for proper operation. Use
these for roof tops (metal and concrete/rebar), and
mounted from the ground in moist soil conditions.
This antenna has a very small visual impact, as
there is only a single wire in the air. This can also
be installed as a sloper from a tower or building down to the ground.
Recommended use is with our matching MK112 heavy duty masts.
Our baluns and balancing networks are available in two
power ratings. The high power versions allow 1 KW
continuous transmission. Intended for use with our
folded dipole and end-fed Vee antennas. They may also
be used for Rhombics, Delta loops, and V-beams.
