Something old, something new . . .

Something borrowed, something blue

And a silver sixpence in her shoe.

Once, it seemed that June was the month for weddings.

Now, the other eleven months of the year are almost as popular.  We will be attending no June weddings this year, but there are several planned for later in the summer.

It also seems many of the long time traditions are giving way to newer traditions.

During some recent cleaning and reorganizing of my sewing room, I discoverd this garter made several years ago.

Many of the recent weddings I have attended, do not include the traditional tossing of the garter.

Since I love ribbon, lace and traditions, there is still a place in my heart for the traditional wedding garter -- even if it is not tossed.

It can simply be something kept, as a reminder of a joyful day.

This particular garter was created with white French laces and ecru silk satin ribbon.

I usually make the elastic casing out of lace, also.  It looks as pretty from the inside, as the outside!

A knotted rosette embellishes the front.

A knotted rosette or frou-frou is made by tying loose knots at equal increments along a length of narrow ribbon.  The ribbon is then gathered and tied into a rosette.  These types of rosettes are also seen on baby bonnets and other types of heirloom clothing.

Rosette Party!

I am joining the French Cupboard's Rosette Party!

The original post, with instructions for creating old-fashioned ribbon rosettes,

may be found here.

Hop over to the French Cupboard for more rosette sharing!

 

Bonnet with Frills Upon It, IV

As promised, more bonnets!

This bonnet is so simple, but so sweet!  Construction incorporates the basics of heirloom sewing by machine:  joining lengths of lace and Swiss entredeux insertion with a tiny zig zag stitch.  A ruffle of wide Swiss edging, rolled and whipped to the fancy band, frames the baby's face.  A narrow piece of Swiss Nelona is rolled and whipped to the back.   It is then gathered with ribbon run through a narrow casing.

This little bonnet could not be more simple to construct!  It originally was a linen hand towel with a wide cutwork border.  Again, a narrow casing in the back shapes the bonnet.

This was the project in a class taught by Jeannie Baumeister at a past Smocking Arts Guild of America (SAGA) Convention.

The streamers on both bonnets are embellished with silk satin ribbon rosettes -- one of my favorite embellishments!

I normally use ribbon that is approximately 1/2" wide.  Cut a piece of ribbon 9-1/2" long.

Make a mark 1/4" from the end, at the top of the ribbon.

Continue marking the length of the ribbon at 1" intervals.

At the bottom of the ribbon, make another series of marks.

These marks are also 1" apart; however, they are staggered halfway between each of the marks at the top.

Please note that these very large markings are for photography purposes only!  You have no idea how many heart palpitations I had marking this beautiful silk satin ribbon with huge blue blobs!  The blobs may also cause some of the measurements above to appear a little skewed.  Sorry! 

Your marks should be tiny -- just a speck. 

I often just eyeball the measurement, or finger press them into place.

Next, bring the raw ends together and stitch a tiny 1/4" seam.  This is why you placed that first mark at the 1/4" spot.

Again, contrasting orange thread used only for photography.  You will use sewing thread that matches your ribbon.  Some directions for ribbon rosettes instruct you to stitch the seam later in the process.  I have found it is easier to stitch before beginning to gather the rosette.

Use a single thread.  Be sure to knot at both the beginning and the end of the seam.

You don't want your beautiful rosette falling apart!

After stitching and clipping your thread, turn the ribbon circle right side out, and finger press the seam open.

Now, play Dot to Dot! 

Again, using a knotted single thread, connect the dots with running stitches.  Begin stitching at the seam you stitched in the last step.

I have not found that there is any magic to the number or length of stitches.  Normally, I get about 3-4 stitches on the 1/2" width ribbon.

Since the seam is already stitched and finger pressed open, my needle and thread do pierce the seam allowance.  I find that this helps to hold the beginning knot a little more securely.  The stitches also help hold that little seam allowance in place when you begin to form the actual rosette. 

After connecting several of the dots, pull the thread gently to gather the ribbon. You may find the ribbon gathers more easily and smoothly, if you hold your thumb over it while pulling the thread with your other hand.

Continue stitching and connecting the dots.

You should finish connecting the dots at the seam where you began.  Again, my needle and thread pierced the seam allowance on the back.

Gently pull the thread to gather the ribbon in a circle.

Next, take just a nip in the top of each petal.

You will simply be taking your needle and thread through the top of each little peak.

When you have gone all the way around, tug gently to pull the petals together and close the center.

Your rosette will also begin to flatten. You may have to smoosh it a little and help it along!

I usually take a couple of tiny stitches in the center, pulling everything together neatly.

Take the needle and thread to the back and tie off.

You may still need to smoosh or arrange the petals to your liking. 

Yes, I love the word "smoosh"! 

Some of the edges may cup up, and others under.  You are the creator of this rosette, and may determine which way you like best!  I prefer mine to cup under.

Look how beautiful it can be when stitched with matching thread and no blue blobs!

A tiny mother of pearl shank button in the center helps to hide any stitches.

I also use the button to help attach the rosette and the streamers to the bonnet.  A few extra tacking stitches will help to secure and position any stray little petals or gathers.

I hope you also enjoy making beautiful rosettes for sweet little bonnets!