Our Design Team project this week at Cuttlebug Challenge was to create something with a "beach" theme. Summer is arriving and lots of us will be heading for the beach to enjoy a bit of relaxation. If you aren't near a beach of any sort you can still throw a beach party and "chill" with your friends. Be sure to stop by the Cuttlebug Challenge blog to see all of the great projects the team has put together.
With "beach" as the theme the obvious cartridge choice was "Life is a Beach" (click the name to go to the information page on the Cricut.com site). I usually try to avoid the obvious... but this cartridge has great beach images that are fun to work with. I challenged myself to try something new - in this case using a product I had never tried to cut with my Cricut - shrink plastic!
Many months ago I purchased this package of shrink film. It is a different brand than the "Shrinky Dinks" I remember from my childhood. The material is thin but very hard and brittle.
There is a charm feature key on Life is a Beach - couldn't get much simpler than that! This screen shot shows some of the images I tried. I also used the shift function to cut "beachy" initials for our family.
I first tried to cut the plastic with my regular blade and using multi-cut two at high pressure and blade depth 6. The first pass didn't get very far so I did another 2x multi cut and then a third 2x multicut (for a total of six). The cut did not go completely through the material and I also had a problem with the multiple multicuts not lining up evenly. So it was time to pull out the Deep Cut housing and blade. I bought one of these quite a while ago when A.C. Moore had all Cricut items at half price for a sale but I had never needed to use it before.
I taped my sheet of plastic to the mat to hold it securely through so many cuts and tried multi-cut 3 times with the deep cut blade. This time the cuts worked and I just needed to push gently to pop them from the background. The blade did grind up some plastic dust so you need to clean up carefully. You will need to experiment to find the best settings for your machine but I thought my experience might be helpful.
I cut the charms at 2 1/2 inches. The plastic shrinks to about 1/3 of the original size when heated. Here are most of the cuts "pre-shrinking" on a 12 x 12 sheet of cardstock.
I used my Cricut hook tool to hold the cut on a cork mat. I chose to use my heat gun instead of baking the charms (I may rethink this for next time...)
The charm looks like it is ruined as it heats up but before long it gets back into shape and is much smaller and thicker. If it is a little out of shape you can round it a bit with your fingers but be careful - it will be very hot!
I was able to shrink most of the charms successfully. The open style of these charms is not the easiest shape to work with, especially if there is not much connection from the image to the circle.
A couple of the charms didn't quite make it - these may have been better done in the oven since the heat gun does blow the material around a bit. I'll try that if I make more.
I don't make a lot of jewelry but I did have some supplies on hand. I threaded some beads on these wires that are meant for earrings. I used a jump ring for the charms so they could dangle more freely.
The charms can be easily fastened around the base of your stemware to help everyone keep track of their beverage (apple juice in the photo but adult beverages allowed!).
The charms can be personalized or based on a theme. A set of these charms makes a great gift for a shower. You can use the initials of the couple and some shapes for their guests to use.
I designed the invitation card last summer using "hide selected contour" to create the interesting cut out design in the card front. Here is a LINK to the post with the Design Studio .cut file.
As you can see from this screen shot, there are many hidden lines. I was curious to find out if this file could now be used on the Gypsy (since the update that was made available last Friday, May 28th).
I saved the files in Design Studio as a .gypsy file, uploaded it to my Gypsy and did a test cut. The transferred file cut perfectly! This is exciting news since I have so many files that I have created that could only be cut in Design Studio prior to this update. I was worried that there might be a problem with the transferred design and I would need to rehide all of the lines but, fortunately, that was not the case.
For those of you who have a Gypsy but don't have Design Studio, here is a download link for the .gypsy file
Beach Party Invitation Card
I have lots more ideas for using this shrink plastic. I want to try the type that can be printed on with an inkjet printer. There are endless creative possibilities for using this material.
I think I will go try to find some more new materials to cut with my Cricut...
Subscribe to Capadia Designs
